I had checked out that laser prints are better than inkjet prints when you aim to move them. I chose to examine and see if there was much of a distinction.
Transfer Image to Wood Laser Printer.
I you want to view the video here it is:
Products Utilized:
- Laser Print on routine paper.
- Inkjet Print on regular paper.
- Modge Podge Image Transfer.
- Water.
- Spray Polyurethane.
- Wood to move too.
- Tidy Rag.
- Scissors.
Action 1: Prepare the Image
Keep in mind to turn your image before printing. Especially if you have text on the picture. If usually printed the image will be back to front, so it needs to be turned initially.
Transfer Image to Wood Laser Printer, If you do not desire a white border around your image, then keep in mind to cut as near to the picture as you can. You might try out various edge designs however I just choose a neat cut appearance. White boards can look great, however.
I eliminated my logo design on both the laser and inkjet variation leaving no white paper proving.
Clicking Here:
Action 2: Use Mod Podge Image Transfer.
All I did next was to paint a thick (however not too thick) layer of Mod Podge image transfer onto the picture itself. I might hardly see the picture through the white Mod Podge when I was done.
I might then use the picture to the piece of wood. I had divided the wood to reveal the distinction in between laser & Inkjet variations. I put both images dealt with down and smoothed them out utilizing my fingers to make sure they were flat and had no creases or bubbles. I might leave them to dry over night.
Action 3: Eliminate Paper Support.
To get rid of the paper support from the images all I did was utilize some tidy water and a tidy rag (I used a piece of an old Tee shirt).
I gently moistened the cloth and dumped the paper back of the images. I left them a brief while to soak; then I started to clean away the wet paper from the picture gently. Beware at this phase since you might eliminate the image itself if you aren't mindful.
Transfer Image to Wood Laser Printer, I got rid of a large amount of the paper and left them to dry to see exactly what was left. There was a fair bit of paper left behind, so I duplicated the previous action of utilizing the damp rag to get rid of the journal. I did this three times for the laser variation and simply two times for the inkjet variety.
The laser print held up terrific however the ink jet change didn't. It started to fade extremely rapidly, and I wasn't able to eliminate the paper completely.
To seal the images to the wood, I utilized spray polyurethane. This will assist secure the pictures and stop them from peeling or getting scratched off.
I believe you will concur that the laser variation is a lot much better quality when compared with the inkjet variety. You can utilize an ink jet print though as you can see, however, I would hugely recommend using a laser printer if possible.
I hope you discovered this instructable helpful.