HP Printer Won't Turn on: Printer problems consist of power problems, which can be complicated particularly if you are trying to print important documents. There are several factors that can cause the printer to not power on, including equipment issues. Via experimentation, you can identify what is causing the power issue with your HP printer.
HP Printer Won't Turn on
Action 1
Plug the printer's power cable into the power outlet. Press the printer's power button and also wait on the power light sign to flash or start blinking. If the power light does not flash, push the button once more. Keep in mind that some HP printers will certainly take a while before they power on, so you need to wait on the device to boot up first. Do not hold down the power switch as well long-- it might power on, and afterwards shut off.
Action 2
Separate the printer's power supply from the power electrical outlet (" power supply" refers to both the power cable and also power module) as well as look for any type of noticeable damages. If the power line is damaged as well as the printer is still under warranty, you might have it replaced by HP. Note that the power line is connected to the "power component" (the one that resembles a laptop adapter). Separate the power component from the printer, and then link the power line right into a power outlet. If the thumbs-up on the power component does not light up, call HP to have it replaced.
Action 3
Connect the power supply to the HP printer once more, and then connect the power cable into the power electrical outlet. Make certain that the power line is connected correctly to the power component. If the printer still does not power on, try connecting the power line right into another power outlet. If the printer powers on this time around, the trouble is with the power outlet.
Action 4
Unplug the USB connector situated at the rear of the printer, and then turn the printer on. If the printer powers on without the USB wire, it may be causing the printer to not power on. Take into consideration replacing the USB cord if this is the case.
