How to Reset the Drum on a Brother Printer

So you have changed the toner cartridge in your Bro printer and followed our helpful toner reset guide. However, there is still a little-LED light blinking, and you still cannot print. Before you choose to toss the printer from the window and begin once again, keep in mind that you will likewise have to reset the drum system counter on your Bro printer. The drum LED will blink if the Bro drum system is near completion of its life or if the drum counter was not reset when you changed the Bro drum system.

How to Reset the Drum on a Brother Printer.

Resetting the drum counter is, in fact, necessary, and two choices are depending upon the printer design you have. We'll take a look at ways to reset the drum system depend on both Sibling HL and MFC printer models.

For Sibling HL printer models:

With the printer on, open the front cover of the printer.

How to Reset the Drum on a Brother Printer, Press and hold down the 'Go' button for about 4 seconds up until all the LEDs illuminate.

Click here for more info:

• How to Add a Printer to iPhone

• How to Fix Printer Ink Problems

• Where to Recycle a Printer

When all 4 LEDs are lit, launch the' Go 'button.

For Bro MFC printer designs:

With the printer on, open the front cover of the printer.

Press the' Options 'secret on the control board. The display screen will reveal 'CHANGE DRUM - 1. YES, 2. NO'.

Press 1 to reset the drum count.

How to Reset the Drum on a Brother Printer, If your printer does not have a numerical keypad, utilize the arrow secrets to scroll to the proper alternative and press 'OK.'

If you follow these directions, you need to have the ability to continue printing. If you do get stuck or have any issues, you can regularly call or email our technical assistance group, and they'll happily assist you to repair any toner and ink associated concerns you might be experiencing.