How to Change the Ribbon on a Zebra Printer.
Wax/resin ribbons are exceptionally resilient versus wear of chemicals on paper. Resin ribbons offer remarkable resilience versus chemicals and heat on synthetics. Zebra printers are geared up with Zebra's trademarked Load-N-Go function. With this feature, altering the fabric is partly automated and takes under 2 minutes. Changing the ribbon is a comparable procedure for a lot of Zebra designs.
Turn the printer on before changing the fabric. This permits the material to integrate properly. Open the cover and press the blue release arrow forward. The release shaft is discovered above the print head carriage. The print head carriage houses the print spindles.
Raise the print head carriage (the blue release arrow is connected to it) and eliminate the utilized ribbon by pulling it towards you. How to Change the Ribbon on a Zebra Printer.
Get More Information:Hold the ribbon spindle in your right-hand man with the white and dealing with the printer. In your left hand, hold the empty spindle. Leave the blue tape on the brand-new ribbon rod.
Location the ribbon on the spindle situated straight under the print head carriage, and put the empty spindle on the take-up spindle to the left of the carriage (this is the smaller sized rod). The spindles are cone-shaped cylinders that fit nicely into the ribbon bar.
Press down on the print head carriage till it clicks back into position. The printer will instantly change the ribbon. After 20 seconds, the LCD screen will show "Ready.". How to Change the Ribbon on a Zebra Printer.