Various designs will have different factors for each Paper Jam mistake, however then setting pointers for Paper Jam Mistake Codes 13. xx are undoubtedly readily available at the same. Hp laserjet printer repair.
Kinds of Paper Jam Mistake Codes 13. xx in HP LaserJet Printer.
Type 1: 13. xx Paper Jam.
After an extensive research study by an expert HP printer technical assistance specialists, this is a kind of mistake where media is jammed in a particular area and potentially at other unidentified areas. Hp laserjet printer repair. If still, the message continues after clearing all the jams, then most likely a sensing unit or sensing unit lever might have got stuck or is broken.Service: For all kinds of jam messages, one ought to carry out the following techniques:
- Eliminate the jammed print media from the area.
- Look for the whole paper course for other pieces of media because of course just.
- Open then thoroughly close the leading cover to clear off the message quickly.
- Look for the suitable sensing units and flags in the paper course to carry out a correct operation.
Click to read more:
Type 2: 13.0 Paper Jam.
This is a kind of mistake where a non-specific paper jam has happened in it.Option:
- Get rid of all the offered jammed media from the particular place.
- Validate thoroughly that the paper tray is appropriately closed.
- Check, or perhaps you can carefully change the feed in addition to the separation rollers.
- Guarantee that there is no blockage in the course, like a torn notepad.
- Open then close the leading cover of it to clear off the message.
Type 3: 13.1 Paper Jam Open Input Trays.
This is a sort of paper-delay jam at the paper feed area.Service:
- Guarantee that the paper trays are well packed in addition to change correctly to permit a simple access to feed on the tray.
- Thoroughly lower the stack height of media found in the tray.
- Examine carefully for the input location for many readily possible blockages such as media in the course.
- Validate that the media do fulfills all the needed specs.
- Look for the pickup feed along with separation rollers for any uncommon wear. If so, then change it as required.
- Turn the media thoroughly in the input tray by roughly 180 °.
Type 4: 13.10 Paper Jam Inspect Duplexers.
Hp laserjet printer repair, This mistake is just due to Jam at duplexer area.Service:
- Look for the duplexer thoroughly and its rear location of the printer for any blockages and even any little damage.
- Look for the duplexer for any correct operation offered.
- Change the duplexer if you believe it's an essential action to carry out.
- Look for the user also for any jamming concerns.